HOBI LABS Hydro Optics, Biology and Instrumentation Labratories
HOBI LABS Lighting the way in aquatic science
About Hobi Labs Contact Hobi Labs
Site Map
Home Page
News
Products
Research
Support
Forum
  Research HydroBeta 

HydroBeta

Overview Example Data Calibration

HydroBeta is calibrated using a method similar to that for our single-angle backscattering sensor (details), and described in a paper published in Applied Optics.

 

Approach

    HydroBeta with illuminated calibration target.  During calibration the target is moved along the path of the laser beam.

    Calibration Photo
  • Calibration is referred to a Spectralon? reflectance standard, not to fluids or microspheres.
    • The irradiance reflectance of the standard is known to be 99%.
    • The radiance reflectance as a function of angle, in water, is measured by HOBI Labs.
    • A second translucent standard (used for forward angles) is calibrated with reference to the solid standard.
  • The response of each receiver to scattering throughout the laser beam is directly measured?not computed from optical approximations.
    • The target is placed in the path of the beam, and moved parallel to it.
    • The output of each receiver is measured as a function of the target's distance along the beam.
    • The resulting curves provide a complete and accurate description of the sensing geometry, which differs slightly for every channel.

 

Typical Response Curves (normalized)

Response Curves
Setup and Procedure

 

  • The target is mounted on a rail such that it intersects the beam.
  • A threaded rod allows the target position to be varied in precise increments.
  • The angle of the target is adjusted on successive runs so that it can be viewed by the various receivers.
  • For receivers at greater than 90 to the beam, a translucent target is used, and the beam scatters forward through it.

 

Copyright © 1998-2012 by Hydro-Optics, Biology, & Instrumentation Laboratories All rights reserved.
All specifications subject to change without notice.