HOBI LABS Hydro Optics, Biology and Instrumentation Labratories
HOBI LABS Lighting the way in aquatic science
About Hobi Labs Contact Hobi Labs
Site Map
Home Page
News
Products
Research
Support
Forum
  ProductsLight Measurement Stable Light Source SLS-1 

Stable Light Source SLS-1

Overview Specifications Manual

Mechanical

  • Controller Width: 25.5 cm (10.0")
  • Controller Height: 9.8 cm (3.8")
  • Controller Depth: 18.4 cm (7.3")
  • Head Depth: 7.3 cm (2.9")
  • Head Mounting Flange Diameter: 9.1 cm (3.6")

Controls

  • Power: On / Off 
  • Thermal Regulation: On / Off
  • Output: High / Low / Off
  • Output Mode: Current / Power

Environmental 

  • Ambient operating temperature: 20 to 30 C
  • Regulated head temperature: approx. 35 C
  • Humidity less than 90% (non-condensing)

Optical

  • Instability: 0.1% (24 hours)
  • Illuminated aperture: 2.2 cm (0.87")
  • Peak Radiance: 0.05 to 0.3 W/m2/sr/nm, depending on wavelength and configuration ("low" output setting reduces output by a factor of 4).
  • Spectrum depends on choice of LED; can be adjusted depending on target device.
  • Example spectrum:
    Sample Spectrum

Electrical

  • Input power: 90 to 264 VAC, 47 - 63 Hz, less than 1A
  • Low-voltage outputs for measuring drive current and optical output for each of 4 LED channels
Copyright © 1998-2012 by Hydro-Optics, Biology, & Instrumentation Laboratories All rights reserved.
All specifications subject to change without notice.